Flaked Epoxy Flooring
Epoxy system
- Lifetime warranty
- Two-day install
- Priced by the square foot
TD Epoxy Flooring installs flaked epoxy floors in garages, workshops, and commercial spaces across the Greater Springfield IL area. Flaked epoxy is the most durable system we install. It costs $8 per square foot and carries a lifetime warranty.
What a flaked epoxy floor is made of
A flaked epoxy floor from TD Epoxy Flooring is built in three layers.
Moisture vapor barrier base coat
Holds 25 PSI of moisture pressure rising through the slab. Goes down on every flaked epoxy job.
Color flake broadcast
Choose a low or full broadcast. The difference is flake density, meaning how much flake covers the floor.
Polyaspartic topcoat
Flexible, UV resistant, and adds moisture resistance. This is the layer you walk and park on.
How we install a flaked epoxy floor
TD Epoxy Flooring grinds the slab with a concrete grinder running diamond puck attachments, and a scratch test on your concrete decides which grit we grind with. Grinding opens a pore profile in the surface, and that profile is what the epoxy physically bonds to. Repairs happen before anything gets coated: we fill every crack and chip, apply a self-leveling repair product to spalled areas, and leave saw-cut joints as they are.
Grind, repair, base coat
Mechanical grind, crack and spall repair, then the moisture vapor barrier base coat. The base cures fully overnight.
Topcoat
The polyaspartic topcoat goes down and the floor is done. Two days, start to finish.
Epoxy only peels when the prep gets skipped
A properly prepped epoxy floor does not peel. Peeling happens when the coating never bonded to the concrete, and skipping the mechanical grind is the usual cause: without the ground-in surface profile, the coating sits on top of the slab instead of gripping it. Unfilled cracks cause their own problems, swallowing material during the install and showing through the finished floor.
Flaked epoxy vs one-day polyaspartic coatings
Some installers coat a garage floor in one day by using polyaspartic as both the base and the topcoat. Here is the number that matters.
Moisture pressure held by the moisture vapor barrier base coat TD Epoxy Flooring installs under every flaked floor
Moisture pressure held by polyaspartic when a one-day installer uses it as the base coat
We use polyaspartic where its strengths matter, as a flexible, UV-resistant topcoat, with a true moisture barrier underneath it.
What flaked epoxy costs
$8 per square foot
- Mechanical grinding, grit set by scratch test
- Crack and spall repair
- Moisture vapor barrier base coat
- Flake broadcast, low or full
- Polyaspartic topcoat
Veteran discount available. Written quote within 2 to 3 days of the on-site inspection.
Estimate your floor
Rough idea only. Final pricing comes off measured square footage.
For reference: a one-car garage typically measures 240 to 300 square feet, which works out to $1,920 to $2,400. A two-car garage typically measures 400 to 575 square feet, which works out to $3,200 to $4,600.
Contractor-grade product only
TD Epoxy Flooring installs contractor-grade product, never big-box kits.
- Colors are mixed by the manufacturer with less filler than retail product
- Castor oil free, so the floor will not yellow in sunlight
- No maintenance coats needed once the floor is installed
Lifetime warranty
Every flaked epoxy floor we install carries a lifetime warranty. The longest warranty we have seen from a local competitor is 15 years. The warranty excludes failures outside our control or the product’s control.
Other systems we install
Not sure flake is the right fit? Compare it against metallic epoxy flooring, our cosmetic system, or solid epoxy flooring, the clean single-color finish. Both follow the same prep standard and carry the same lifetime warranty.
Service area
Springfield, IL and the towns around
Ready when you are
Get a free estimate
Tell us about your project. We'll take a look, talk through your options, and put a real quote in writing. Veteran discount available.